|
Using
the Menu Controls
To browse t he menu
options, press < or > .
To select a menu option,
press .” select”
To return to a previous
menu, press “back”.
Connect to Your Wireless Network
If you make a mistake at
any point and wish to navigate
backward, press the
“back” key. This will return you to
the previous screen.
Step 1: Connecting
Power
Plug one end of the power
adapter into the Power jack
located on the bottom of
the unit, then plug the other end
into an AC 100-240V wall
outlet. Press the “power button” to turn
the radio on.
Step 2: Connecting
to the Internet
When the unit turns on,
the Main menu will be displayed.
Press < or >
to choose “Internet Radio” then press
“select” to
confirm.
Step 3: Select Your
Region
Press < or >
to choose your region from the menu and then
Press “select” to
confirm. The network wizard will launch.
Step 4: Select Your
Network (SSID)
The unit will scan the
area and display all available
networks. Press <
or > to choose the name of
your network from the
menu list and then press
“select”
to confirm.
If your network does not
have WEP or WPA security
enabled, the unit will
finish connecting to the network
and return to the
Internet Radio menu.
Step 5: Enter Your
WEP/WPA Password
If security is enabled,
you will be asked to input the WEP
or WPA password. A
password entry screen will display as
follows:
Press < or >
to cycle through the alphanumeric
character list. Press “select”
to input a character.
If you make a mistake
while entering your password,
select the ‘ < ’
icon to delete the previous character.
Select the ‘┘‘icon when
you have finished entering
your password,.
The unit will finish
connecting to the network and return
to the Internet Radio
menu.
Troubleshooting your network connection
If after trying to
connect to your wireless network, the display
reads “Failed to
connect,” please take the following steps:
Ensure that your wireless
access point and internet
modem are connected and
working normally.
Try
resetting your wireless access point and
internet modem (i.e.,
turn them off and then
back on again).
Move the radio to a
location where the wireless
signal is stronger (e.g.,
closer to your wireless access
point).
Make sure that your
password has been entered
correctly. |
